U-Line CLR60 Manual de usuario descargar pdf (Pagina 13)

4. Locate the compression fit-

ting and ferrule packed in the

unit. Slide the compression

fitting and ferrule over the

1/4 inch water supply line.

Do not use thread sealing

compound or tape. Using

two wrenches, tighten the

compression fitting on the

supply line (see Figure 6).

Figure 6

5. Carefully bend the water sup-

ply line into position and con-

nect the line to the solenoid

valve (see Figures 7 and 8).

Avoid kinking the water sup-

ply line.

Figure 7

Figure 8

6. For recessed installations,

allow extra water supply line

length to provide slack for

easy removal from the

recessed area (see Figure

9). This will also safeguard

against kinking the line.

Figure 9

UL200

UL204A

WATER LINE

UL201

POWER

CORD

WATER LINE

UL134

11

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comentarios a estos manuales

Sin comentarios