U-Line U-BI1215SOD-00A Guía de usuario descargar pdf (Pagina 25)

USER GUIDE

Ice 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

ICE MAKER ADJUSTMENT

Ice Cube Thickness Adjustment

Interval - As Required

On ice maker equipped models, adjust the cube size by

changing water amount injected into the ice maker

assembly as follows:

1. Remove the ice maker assembly cover (1).

2. Find the adjusting screw on the ice maker assembly

control box (2). The adjusting screw is just below the

minus (-) and plus (+) signs on the control box.

CAUTION

Too large of an adjustment to the screw can

cause the water to overflow the ice maker and

can cause property damage.

3. Turn the adjusting screw toward the minus (-) sign

(clockwise) for smaller cubes or toward the plus (+)

sign (counterclockwise) for larger cubes.

4. Install the ice maker assembly cover.

ADJUSTING ICE HARVEST

1. Remove the front grille (see GRILLE-PLINTH

INSTALLATION).

2. Using a flat tip screwdriver, turn the adjusting screw

(3) a small increment clockwise for a COLDER setting

(slower ice production) or counterclockwise for a

WARMER setting (faster ice production).

3. Reinstall the front grille (two screws).

Warmer Colder

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 34 35

Sin comentarios

U-Line U-BI1215SOD-00A Guía de usuario Pagina 25