U-Line WINE CAPTAIN 2175RC Guía para resolver problemas descargar pdf (Pagina 17)

U-Line Self-Closing Door Alignment and Reversal 15

5. After adjustment is complete, remove the door closers from the

bottom hinge, clean thoroughly and apply petroleum jelly to the

mating surfaces of the closers. Be sure that pins on closers align

with holes in the door and bottom cabinet hinge plates. Mount

door and install top hinge pivot pin.

Door Reversability

Location of the unit may make it desirable to mount the door on

the opposite side of the cabinet.

All black and white doors are field-reversible.

All stainless steel glass doors are also field reversible.

Stainless steel solid doors must be ordered right or left-hand

hinged.

Reversing Black or White Doors

• The Hinge hardware will be removed and reinstalled on the

opposite side of the cabinet.

• The top hinge hardware will be reinstalled on the bottom of the

opposite side of the cabinet.

• The bottom hinge hardware will be reinstalled on the top of the

opposite side of the cabinet.

Remove Door

1. Hold door to keep it from falling.

2. Remove hinge screw pin (1) from top hinge using a Phillips

screwdriver.

3. Remove door by tilting forward and lifting door off bottom hinge

closer inserts.

4. Reinstall hinge screw pin (1) into top hinge using a Phillips

screwdriver.

Remove hole plugs.

Remove plastic screw plugs (three each, top and bottom)

(3)

from new hinge location. Save for reinstallation later.

Remove existing top hinge.

Remove existing top hinge (three screws) (2).

Reinstall hinge to bottom opposite.

1. Install the hinge just removed from the top to the BOTTOM

opposite side of the cabinet (three screws) (2).

2. Remove the two door closer inserts (4) from the existing

bottom hinge.

3. Install door closer inserts as shown on the new bottom hinge

(4).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

U-Line WINE CAPTAIN 2175RC Guía para resolver problemas Pagina 17