U-Line WINE CAPTAIN 2175RC Guía para resolver problemas descargar pdf (Pagina 18)

16 U-Line Self-Closing Door Alignment and Reversal

Remove preexisting bottom hinge.

Remove the preexisting bottom hinge (three screws) (2).

Reinstall hinge to top opposite.

Install the hinge just removed from the bottom to the TOP opposite side of the cabinet (three screws) (2).

Reinstall Hole Plugs.

4. Install plastic screw plugs (three each, top and bottom)

(3)

into holes where hinge hardware was removed.

Prepare door for reinstallation.

1. Remove plastic hole plug from top of door handle and reinstall on opposite side.

2. With bottom of door facing up, remove pivot plate (5) (two screws).

3. Flip over and install pivot plate on opposite side of door. Ensure notch in plate faces center.

Install Door.

1. Hold door upright and tilted forward.

2. Lift door on to bottom hinge closer inserts.

3. Tilt door forward into position.

4. Hold door to keep it from falling.

5. Reinstall hinge screw pin (1) into top hinge using a Phillips screwdriver.

Align and adjust the door:

Align and adjust the door, see DOOR ALIGNMENT AND ADJUSTMENT on page 14.

NOTCH

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Sin comentarios

U-Line WINE CAPTAIN 2175RC Guía para resolver problemas Pagina 18