U-Line CLR2160 Guía de instalación descargar pdf (Pagina 3)

05/2007 3 www.U-LineService.com

CLR2160/CLRCO2175 Ice Makers

General Precautions

Use this appliance for its intended purpose only and

follow these general precautions along with those listed

throughout this guide:

WARNING

SHOCK HAZARD — Electrical Grounding Required.

• Keep the unit unplugged throughout installation

except during testing.

• Never remove the round grounding prong from

the plug and never use a two-prong grounding

adapter.

• Never use an extension cord to connect power to

the unit.

• Always keep your working area dry.

CAUTION

• Use care when moving and handling the unit. Use

gloves to prevent personal injury from sharp edges.

• Do not lift the unit by the door or door handle.

• Do not install the unit behind closed doors or in any

way that would obstruct airflow to the front grille,

which may cause the unit to malfunction.

You have received a carton containing your CLR2160 Ice

Maker or CLRCO2175 Clear Ice Maker/Refrigerator with

a package inside containing a Use and Care Guide, a

Drain and Water Installation Instruction sheet, a Product

Registration Card and water connection parts. Complete

and mail the Product Registration Card or register

online at www.U-LineService.com. Once your unit is

installed, keep the Use and Care Guide and this

Installation Guide in a safe place for future reference.

Your unit is Black, White or Stainless Steel. Black and

White units have a reversible door with a slightly

contoured handle across the top. They come with a flush

mounted door panel that, when removed, will accept a

custom 1/4-inch thick door panel or a 3/4-inch thick full

overlay door panel. Stainless Steel units are covered with

a protective coating and have been ordered left- or right-

hand hinged. The Stainless doors are not reversible and

do not accept custom panels. CLR2160 Ice Makers/

CLRCO2175 Clear Ice Maker/Refrigerators may be ordered

with or without a factory-installed drain pump. Please

carefully follow the directions that apply to your unit and

your intended design.

Tools/Materials Required

• Screwdrivers — slotted and Phillips head

• 1/4” Nut driver (optional)

• Slide cutter

• Copper tubing cutter

• 12” Level

• 9/16” Open end wrench

• 7/16” Open end wrench

• Pliers

• (1) Brass garden hose fitting (supplied with product)

• (10’ or more depending on water supply location) 1/4”

O.D. soft copper tubing

• *(10’ or more depending on drain location) 5/8” I.D. braid

reinforced PVC drain tubing

• *(3) 11/16” to 1 1/4” Clamp range worm drive hose clamps

• *(1) Nylon barbed coupling for 5/8” I.D. hose

• *(1) 5/8” to 7/8” adapter (optional)

• P60 Drain Pump (if required and not already factory

installed, see Page 17)

• 1/4-inch thick door panel material and cutting tools

(Black or White units) (If installing a 1/4”Panel)

• Full Overlay Door Panel Kit (part number U-OL2175B —

Black or part number U-OL2175W — White), 3/4-inch door

panel overlay, cutting tools, drill and bits (Black or White

units) (If installing a 3/4” Full Overlay)

Note: Items with an “*” in front of them can be purchased

in a kit from your dealer. Order U-Line Part No.

U-CLRDRAINKIT and this kit will contain all these items.

These items are only sold as a kit, each item is not sold

seperately.

2 Inspect and Plan

1 2 3 4 5 6 7 8 ... 23 24

Comentarios a estos manuales

Sin comentarios

U-Line CLR2160 Guía de instalación Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Neveras U-Line CLR2160